Some Recommended Initial Settings: Due to different firmware versions not all will work on every PL-880 so try them out and see for yourself.
Muting Threshold – Power On – Press & Hold The 9 Key – Dial it down to 00 . Press 9 again to set. You must do this for AM, SW, and SSB modes.
Toggle Seconds Display On/Off – Power Off – Press & Hold 8 key.
Digital Noise Reduction – Power On Press 6 Key – set it to Off.
FM De-emphasis – Power On . Press 5 – Set to 75 uS USA or 50 uS Europe
Low Battery Limit Adjustment – Power Off Press 4 Key 3.4 – 3.7
To display all LCD elements, Power Off Press – AM-BW button
A second press displays the firmware version
A Third Press shows the firmware date
There are several more arcane adjustments that I won’t go into here and some of which did not work on my radio but suffice it to say that the PL-880 offers lots of room for personalization. Again, an unusually exhaustive discussion of all the settings is available at the Yahoo PL-880 Group:
There are several more arcane adjustments that I won’t go into here and some of which did not work on my radio but suffice it to say that the PL-880 offers lots of room for personalization. Again, an unusually exhaustive discussion of all the settings is available at the Yahoo PL-880 Group:
Credits to RadiojaYallen
No comments:
Post a Comment